联系我们
公司名称：XXX
电话：XXX
手机：XXX
联系人：XXX
地址：XXX
新闻动态
知识┃断桥铝门窗安装过程
断桥铝门窗
Bridge and window
安装过程
The installation process
Swans
Swans
说到断桥铝安装的顺序，小编还是知道一些的，小编也跟着我们公司的师傅去过现场，看过断桥铝安装的过程，说到断桥铝安装主要有以下几个顺序：
When it comes to the order of the broken bridge aluminum installation, small make up or know some small make up also follow our teacher has been to the scene, saw broken bridge aluminum installation process, said to the broken bridge aluminum installed mainly has the following order:
安装程序
The installation program
窗框就位→框固定→填塞缝隙→安装调试五金配件→安玻璃→打胶、清理。
Window frame position - box fixed - fill the gap - install debugging hardware accessories - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
施工要点
The main points of construction
a、各楼层窗框安装时均应横向、竖向拉通线，最好斜拉下对角线，主要就是开启扇窗口做到水平一致，上下顺直，准确无误。
A, each floor window frame installation should be horizontal, vertical pull the line, the best inclined to pull down diagonals, basically be open the fan window to achieve horizontal consistency, up and down straight, accurate and correct.
b、窗框与墙体固定时，先固定上框，后固定边框，采用塑料膨胀螺栓固定。
B, the window frame and the wall fixed, first fixed the frame, the rear fixed frame, the plastic expansion bolts fixed.
c、框与洞口之间的伸缩缝内腔均采用闭孔泡沫塑料，发泡剂等弹性材料填塞，表面用密封胶密封。
C, the expansion joints between the box and the hole are filled with the closed - hole foam plastic, the foaming agent and other elastic materials, the surface is sealed with sealant.
《按照图纸进行安装》
Installation according to drawings
______
...
Swans
Swans
俗话说断桥铝门窗三分产品七分安装，只有安装技术好了才能让您的门窗更加的使用长久，意瑞丰系统门窗是一家有30多年的门窗企业，公司的师傅都是至少5年以上门窗从业经验的。
Three points as the saying goes, broken bridge aluminum doors and Windows products 7 minutes of installation, only the installation technology is good to let your doors and Windows more use for a long time, meaning ruifeng system Windows is an enterprise with more than 30 years of doors and Windows, master of the company is at least 5 years experience in Windows and doors.
1、安装前应对门窗洞口的形状和位置精度进行放样校核检查预埋砼的数量和位置是否符合设计要求高层窗是否按规定接入防雷带对于不合格的部分应督促建设单位整改。
1, before installation to Windows and doors hole shape and position accuracy of lofting check check the number and location of embedded concrete meets the design requirements for high-rise window is connected to the lightning protection belt by the regulation for the unqualified parts should supervise and urge the construction unit.
2、用水泥砂浆嵌缝的氧化材门窗上墙前应作防腐处理。除朝外墙面外窗框的其它表面均用粘胶带或塑料袋保护。朝墙面不得有粘胶带或塑料袋的存在以免造成结合部缝隙渗水。
2. Anti-corrosion treatment should be done before the wall of the oxidized material with cement mortar. Other surfaces outside the outer walls are protected by adhesive tape or plastic bags. No adhesive tape or plastic bags should be used for the wall to avoid the seepage of the joint.
3、门窗上墙后用木楔块调整定位，再用射钉固定不得用铁钉、木楔固定。嵌缝前应请监理单位或建设单位做好隐蔽工程验收记录后并对门窗的垂直、水平、对角线进行校核嵌缝后木楔块不得遗留在缝内。
3. Adjust the positioning of the wooden wedge after the window and the wall, and fasten the nail and wooden wedge with the pin. Before the sealing, the supervision unit or the construction unit should be asked to complete the concealed work acceptance record and the vertical, horizontal and diagonal lines of the doors and Windows should be checked and the wooden wedge shall not be left in the seam.
4、断桥铝门窗窗框与墙体间打防水胶必须在墙体干燥后进行。若墙体未干燥、灰尘未清除干净墙体释放出的水蒸气及会使密封失效。
4. The waterproof glue between the window frames and walls of the bridge is to be carried out after the wall is dry. If the wall does not dry, dust does not clear the water vapor that the wall releases and can make seal failure.
5、湿作业完成后安装玻璃和窗扇前清除保护的粘胶带或塑料袋以及窗框部门的污物
5. Remove adhesive tape or plastic bags and window frames from the protective adhesive tape or plastic bags before finishing the wet job
6、玻璃和窗扇安装后应检查配件是否漏装、安装是否牢固、窗扇启闭灵活验收前外开平开窗应关闭防止疾风暴雨造成窗扇的损坏。
6. After installation of glass and window fan, check whether the fittings are missing, installed or not, and the open and open Windows should be closed to prevent the damage of window fans.
7、验收前应对断桥铝门窗进行清洁和自检不得使用对铝型材、玻璃及五金配件有腐蚀性的清洁剂对自检出来的问题应及时整改。
7. Before acceptance, clean and self-check of aluminum doors and Windows of Bridges should not be used to inspect the products with corrosive cleaning materials, glass and hardware fittings.
Bridge and window
安装过程
The installation process
Swans
Swans
说到断桥铝安装的顺序，小编还是知道一些的，小编也跟着我们公司的师傅去过现场，看过断桥铝安装的过程，说到断桥铝安装主要有以下几个顺序：
When it comes to the order of the broken bridge aluminum installation, small make up or know some small make up also follow our teacher has been to the scene, saw broken bridge aluminum installation process, said to the broken bridge aluminum installed mainly has the following order:
安装程序
The installation program
窗框就位→框固定→填塞缝隙→安装调试五金配件→安玻璃→打胶、清理。
Window frame position - box fixed - fill the gap - install debugging hardware accessories - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
施工要点
The main points of construction
a、各楼层窗框安装时均应横向、竖向拉通线，最好斜拉下对角线，主要就是开启扇窗口做到水平一致，上下顺直，准确无误。
A, each floor window frame installation should be horizontal, vertical pull the line, the best inclined to pull down diagonals, basically be open the fan window to achieve horizontal consistency, up and down straight, accurate and correct.
b、窗框与墙体固定时，先固定上框，后固定边框，采用塑料膨胀螺栓固定。
B, the window frame and the wall fixed, first fixed the frame, the rear fixed frame, the plastic expansion bolts fixed.
c、框与洞口之间的伸缩缝内腔均采用闭孔泡沫塑料，发泡剂等弹性材料填塞，表面用密封胶密封。
C, the expansion joints between the box and the hole are filled with the closed - hole foam plastic, the foaming agent and other elastic materials, the surface is sealed with sealant.
《按照图纸进行安装》
Installation according to drawings
______
...
Swans
Swans
俗话说断桥铝门窗三分产品七分安装，只有安装技术好了才能让您的门窗更加的使用长久，意瑞丰系统门窗是一家有30多年的门窗企业，公司的师傅都是至少5年以上门窗从业经验的。
Three points as the saying goes, broken bridge aluminum doors and Windows products 7 minutes of installation, only the installation technology is good to let your doors and Windows more use for a long time, meaning ruifeng system Windows is an enterprise with more than 30 years of doors and Windows, master of the company is at least 5 years experience in Windows and doors.
1、安装前应对门窗洞口的形状和位置精度进行放样校核检查预埋砼的数量和位置是否符合设计要求高层窗是否按规定接入防雷带对于不合格的部分应督促建设单位整改。
1, before installation to Windows and doors hole shape and position accuracy of lofting check check the number and location of embedded concrete meets the design requirements for high-rise window is connected to the lightning protection belt by the regulation for the unqualified parts should supervise and urge the construction unit.
2、用水泥砂浆嵌缝的氧化材门窗上墙前应作防腐处理。除朝外墙面外窗框的其它表面均用粘胶带或塑料袋保护。朝墙面不得有粘胶带或塑料袋的存在以免造成结合部缝隙渗水。
2. Anti-corrosion treatment should be done before the wall of the oxidized material with cement mortar. Other surfaces outside the outer walls are protected by adhesive tape or plastic bags. No adhesive tape or plastic bags should be used for the wall to avoid the seepage of the joint.
3、门窗上墙后用木楔块调整定位，再用射钉固定不得用铁钉、木楔固定。嵌缝前应请监理单位或建设单位做好隐蔽工程验收记录后并对门窗的垂直、水平、对角线进行校核嵌缝后木楔块不得遗留在缝内。
3. Adjust the positioning of the wooden wedge after the window and the wall, and fasten the nail and wooden wedge with the pin. Before the sealing, the supervision unit or the construction unit should be asked to complete the concealed work acceptance record and the vertical, horizontal and diagonal lines of the doors and Windows should be checked and the wooden wedge shall not be left in the seam.
4、断桥铝门窗窗框与墙体间打防水胶必须在墙体干燥后进行。若墙体未干燥、灰尘未清除干净墙体释放出的水蒸气及会使密封失效。
4. The waterproof glue between the window frames and walls of the bridge is to be carried out after the wall is dry. If the wall does not dry, dust does not clear the water vapor that the wall releases and can make seal failure.
5、湿作业完成后安装玻璃和窗扇前清除保护的粘胶带或塑料袋以及窗框部门的污物
5. Remove adhesive tape or plastic bags and window frames from the protective adhesive tape or plastic bags before finishing the wet job
6、玻璃和窗扇安装后应检查配件是否漏装、安装是否牢固、窗扇启闭灵活验收前外开平开窗应关闭防止疾风暴雨造成窗扇的损坏。
6. After installation of glass and window fan, check whether the fittings are missing, installed or not, and the open and open Windows should be closed to prevent the damage of window fans.
7、验收前应对断桥铝门窗进行清洁和自检不得使用对铝型材、玻璃及五金配件有腐蚀性的清洁剂对自检出来的问题应及时整改。
7. Before acceptance, clean and self-check of aluminum doors and Windows of Bridges should not be used to inspect the products with corrosive cleaning materials, glass and hardware fittings.
