高价与低价断桥铝门窗 你怎么选？

How do you choose aluminum doors and windows with high price and low price?

断桥铝合金门窗规格很多，主流型材一般有55型，60型，65型，70型，75型，80型。窗纱一体的主流型材一般有80型，95型，100型，108型，125型，135型，150型。

There are many specifications for broken aluminum alloy doors and windows. The mainstream profiles generally have 55 types, 60 type, 65 type, 70 type, 75 type, 80 type. There are 80 main types of window screens. They are Type 95, Type 95, type 100, type 108, type 125, type 135, and 150.

断桥铝门窗市场价格的确很乱，乱的什么程度呢？就拿55断桥门来说吧，便宜的仅300到400左右一平方，而贵的呢，700到800一平方，甚至还有1000多一平方的，这之间差别到底在哪里？从外表看它们并没有什么区别，那问题到底在那呢？今天小编从材料和工艺两个方面来给大家做一个比较。

The market price of broken bridges and aluminum doors and windows is really chaotic. What extent is it chaotic? Take the 55 broken bridge door. The cheap only about 300 to 400 square, and the expensive, 700 to 800 square, and even more than 1000 square. Where is the difference between the two? There is no difference in appearance. What is the problem? Today Xiaobian gives us a comparison from two aspects of materials and technology.

一，材料

First, material

1，型材

1, profile

a、55断桥型材现在市场上厚度从1.2mm到1.8mm毫米都有，仅一根6米长型材仅因厚度不同，差价就有几十元之多。

The thickness of a and 55 broken bridge sections is now from 1.2mm to 1.8mm mm. Only one 6 meter long section is only tens of dollars in thickness due to its thickness.

b，大厂小厂之分：因设备，工艺方面的原因，小作坊生产的型材，加工费每吨在2000多到3000之间，而大厂的每吨加工费达到5000到6000元，这也是个不小的差别哦！

B, the division of small factory: because of equipment, technological reasons, small workshop produced profiles, processing fee per ton between more than 2000 to 3000, and the factory's processing fee per ton of 5000 to 6000 yuan, this is not a small difference!

2，中空玻璃，

2, hollow glass,

a、55断桥中空玻璃有非钢化中空，单面钢化中空，双面钢化中空之分，非钢化中空每平方米60到70元左右，而双面钢化中空却在每平方100多元。

A, 55 broken bridge hollow glass has non steel hollow, single side steel hollow, double-sided steel hollow, non steel hollow 60 to 70 yuan per square meter, and double-sided steel hollow in 100 yuan per square.

b、55断桥玻璃可以装配的中空玻璃的规格有三种，分别是 5+6a+5，5+9a+5，5+12a+5，这三种规格中，5+6a+5的隔音隔热性能最差，5+12a+5的隔音隔热性能最好，他们的价格区别在每平方米25到30元之间。

B, 55 broken bridge glass can be assembled in three kinds of hollow glass, respectively, 5+6a+5, 5+9a+5, 5+12a+5, of these three specifications, 5+6a+5 sound insulation performance is the worst, 5+12a+5 sound insulation performance is the best, their price difference between 25 to 30 yuan per square meter.

3，隔热条

3, heat insulation strip

普通pvc隔热条一般的在6000到7000左右一吨，而尼龙66的隔热条每吨高达28000元，进口的更是每吨在3万多元，你去算算它们之间的差价是多少吧！

Ordinary PVC insulation in general in 6000 to 7000 tons, and nylon 66 heat insulation per ton of 28000 yuan per ton, imports more than 30 thousand yuan per ton, you calculate the difference between them how much it!

4，五金件

4, hardware

就拿一套内开倒五金件来说吧，价格低的市场上才卖不到100元，而质量好的一套就达两三百元，特别是进口品牌，更是高达四 五百元。这差别可是四 五倍哦。

Take a set of inside open hardware, the low price of the market is less than 100 yuan, and a good quality of a set of two hundred or three hundred yuan, especially the import brand, is up to four hundred or five hundred yuan. It's four or five times the difference.

5，玻璃胶

5, glass gum

在安装断桥铝门窗时，有的人为了省钱，用的是两三块钱一支的用于填缝的密封胶，而有的人为了达到质量要求，用的是外墙上的结构胶，每支达到18元以上，拿消费者来说，您是希望为了省钱而用两三块一支的胶？还是为了质量而用质量更好的结构胶？

In the installation of broken bridge aluminum doors and windows, some people in order to save money, the use of two or three dollars a sealant for sealant, and some people in order to meet the quality requirements, use the structural glue on the external wall, each to reach more than 18 yuan, to take the consumer, you want to save money and use two or three pieces of glue? Or better quality structural adhesive for quality?

二，工艺

Two, process

小作坊一整套生产设备也就几万块钱；而大厂仅一台普通精密的双头锯就达6万多，数控的十几万，进口的更是达到几十万元一台，这种投资可不是因为大厂有钱，而是因为它们的切割精度的确不在同一档次上！这还仅是拿一台设备作比较，还有其他若干种设备呢！所以，大厂的投资大，小作坊投资小！生产出来产品，你说谁的质量好？精度高？要生产出质量达标的好产品，硬件投资首先要达标，也只有硬件达标了才能生产出达标的产品来，成本无疑就更高了。

Small workshop a complete set of production equipment is also tens of thousands of dollars, and the big factory only one common precision double head saw up to more than 60 thousand, CNC tens of tens of thousands, import more than hundreds of thousands of yuan, this investment is not because of the rich, but because their cutting accuracy is not in the same grade! This is only a comparison of one device, and a number of other equipment. Therefore, the investment of Dachang is large and small workshops are small investments. To produce the product, who do you say is of good quality? High precision? In order to produce a good product with a quality standard, the hardware investment should be first reached, and only the hardware is reached to produce the standard products, and the cost is no doubt higher.

三，窗形

Three, window shape

其实，窗型不同生产成本也有着天壤之别泥杆 保定古筝 塑料增韧剂 拱形护坡模具 保定空调维修  托辊生产线，比如，一平方开一扇活动窗与五个平方才开一扇活动窗，这种成本上的差价就有几倍之多！

In fact, the window type different production costs also have a world of difference, for example, a square open a window and five square to open a window of activity, the cost of the difference is a few times more!