石家庄市门窗厂-断桥铝门窗,阳光房,肯德基门

With the continuous improvement of people's living standards, the more attention to the quality of life, the sunny room with its good permeability, bring people close to nature, life more comfortable feeling, so more and more popular customers love. Today, Dolly's door and window Xiaobian provides users with some knowledge of sunshine room maintenance in daily life.

1

One

露台阳光房的门窗在使用中，动作要轻，推拉顺其自然；发现有问题不要硬拉硬推，应先排除故障、积灰、变形等推拉困难的主要原因。要保持门窗清洁，特别是推拉槽的清洁。可用吸尘器吸去槽内和密封毛条的积灰。清洁阳光房门窗时，人不要站在框上，也不要拉住铝框做支撑，否则会容易导致框架变形。门窗清洁可使用中性洗洁剂，不要用普通肥皂和洗衣粉，更不能用去污粉，洁厕精等强酸碱的清洁剂。

The doors and windows of the balcony sun room are in use, the movement should be light, push and pull the nature; find problems not hard to push hard, we should first remove the main reasons for the trouble, ash, deformation and other difficulties. Keep doors and windows clean, especially the cleaning of push and pull grooves. Dust can be removed from the tank and sealed with a vacuum cleaner. When cleaning windows and doors, people should not stand on the frame or support the aluminum frame, otherwise it will cause the deformation of the frame easily. Clean doors and windows can use neutral detergent, do not use ordinary soap and washing powder, but also can not use decontamination powder, toilet cleanser and other strong acid and alkali cleanser.

2

Two

雨天过后，露台阳光房应及时抹干淋湿的玻璃和门窗框，特别注意抹干滑槽积水。滑槽用久，摩擦力增加，可加少许机油或火蜡油。应经常检查露台阳光房的连接部位，及时旋紧镙栓，更换已受损的零件。

After the rainy day, the balcony sunlight room should dry wet glass and doors and windows frames in time, paying special attention to dry water chutes. The chute is used for a long time, and the friction force increases. A little oil or wax oil can be added. We should check the connection points of the balcony sunlight room regularly, tighten the bolts in time and replace the damaged parts.

3

Three

定位轴销，风撑，地弹簧等铝合金门窗的易损部位，要时常检查，定期加润滑油，保持干净，灵活。密封毛条和玻璃胶封是保证门窗密封保温的关键部位，如白钢雕塑 小型滚揉机 防火电缆 托辊设备 水刀切割机  铜钟 石雕狮子  校园不锈钢雕塑 扭王块模具有脱落要及时修补、替换。经常检查门窗与阳光房的结合处，日久如有松动易使框架整体变形，影响阳光房门窗的正常使用。

The vulnerable parts of aluminum alloy doors and windows, such as location pin, wind braces, floor springs, etc., should be checked regularly, regularly lubricated, kept clean and flexible. The sealing tape and glass seal are the key parts to ensure the sealing and thermal insulation of doors and windows. Check the joint of doors and windows and sunshine rooms frequently. If the joints are loose for a long time, the frame will be transformed as a whole and affect the normal use of windows and doors.